VoLANs VL1010-PX

VL1010 - IP PBX for SOHO

VL1010, the smallest one among VL series, is a compact IP PBX for home offices and tele-workers. This model supports up to 10 subscribers.

With one PSTN line and Internet access, you can attach up to one analog phone and several IP phones or PC soft-phones. Users can fully enjoy various IP PBX functionalities such as Call Parking, IVR, Conference, Voicemail, and more.

By plugging it into existing IP network and registering with VoIP service provider, VL1010 will give you ways to reduce PSTN call charges. VL1010 also provides PSTN backup feature for seamless communication in case of VoIP service failure, or unexpected internet disconnection.

Key Features

Basic PBX Features:

• Call Hold/Unhold
• Call Transfer (Blind/Attended)
• Call Forwarding (Always/Busy/No-Answer/Error/Time-Based)
• Call Pickup (Direct/Group)
• Call Park/Unpark
• Intercom (Direct/Group)
• Three-way Call
• Music on Hold
• Music on Ringback
• Group Ringing (Hunt/Circular-Hunt/Ring-All/Random)
• Distinctive Ringing
• DTMF Relay (in-audio/rfc2833/SIP Info)
• Flexible Dialplan
• SIP Trunking
• DID/DOD
• FXO backup (in case VSP is unavailable)
• Call Screening
• DND
• Virtual Caller ID
• Anonymous Caller ID
• Phonebook

Advanced PBX Features:

• Voicemail (with e-mail forwarding)
• Message Waiting Indication
• IVR
• Conference
• Call Recording
• RAA
• Feature Code
• PBX-to-PBX interoperability

FXO:

• LEC (G.168)
• Caller ID Detection
• Call Progress Tone Detection
• DTMF Generation & Detection
• VAD/CNG
• Packet Loss Concealment
• Adaptive Jitter Buffer
• Dynamic Payload Support
• Adjustable Audio Frames per Packet

FXS:

• Battery Feeding for Analog Telephone
• Ringing Signal up to 3 LEN
• Type I/II FSK Caller ID Generation & Detection
• Call Progress Tone Generation
• DTMF Generation & Detection
• VAD/CNG
• Configurable Tip/Ring impedance
• Hook Flash Signaling

Management:

• System Configuration via WEB Manager
• Multi-Language Support (English/Korean/Turkish)
• Password Protection
• Configuration Backup/Restore thru WEB/FTP
• S/W Upgrade from Remote Place
• Direct Phone Management thru WEB
• IP-Phone Auto Provision
• Event Log
• Call Log
• CDR
• SNMPv2

Specification

H/W:

• CPU: Embedded Network Processor
• Memory: 128MByte DDR - SDRAM
• Storage: 256MByte Flash Disk

Network Interfaces:

• Ethernet: 2 Ports (100Mbps)
• PSTN: 1 Port
• Analog Telephone Interface: 1 Port

Other Interfaces:

• LED Status Indicators
• DC 12V Power Connector
• Restore Factory Defaults Button

Power Consumption:

• Max. Operational Power Consumption: 20 W

Physical:

• Dimensions: 135(W) x 100(D) x 35(H) mm
• Weight: 190g (without Power Adaptor)

System Capacity:

• Max. Extensions: 10 Subscribers
• Max. Concurrent Call: 2
• CDR Database: up to 20MByte records

Ethernet Interface:

• WAN/LAN: 100Base-TX complying IEEE 802.3 Standards, supports Auto-Negotiation
• RJ45 Connector: Ethernet packets over CAT5-UTP cable

PSTN Interface:

• 2 Pin(Tip-Ring) RJ11 Connector for each PSTN port
• Up to 1KV Line Isolation and Surge Protection
• TX power of up to +10 dBm into 600Ohm
• Ringing Detection
• CID Monitoring and Detection
• Parallel Phone Detection

Environmental:

• Operating Temperature: 0¨¬C ~ 50¨¬C
• Operating Humidity: 20% ~ 80% RH
• Storage Temperature: -20¨¬C ~ 60¨¬C
• Storage Humidity: 20% ~ 95% RH