Sangoma A116E

Sangoma A116

The highest density digital interface card in the market

Sixteen spans of T1, E1 or J1 available with carrier-grade hardware echo cancellation.

• 16 T1/E1 spans with PCI Express interface
• Double the density of any card on the market today
• Supports up to 480 simultaneous voice calls
• Supports up to 32.8 Mbps of full duplex data
• Asterisk^® and FreeSWITCH^® ready
• Easier implementation in Asterisk based PBX systems
• Support for large Value-Added Services
• Expand large IVR Systems and Call Centers
• Easier long term maintenance

Technical Specifications

• Sixteen T1/E1 ports with optimum PCI–Express interface for high performance voice and data applications
• Mix T1 channel banks and E1 networks with full channel synchronization. TDM clocking mode lets network timing to be passed from a network-connected DS0 to any or all of the other ports so both T1 and E1 are supported simultaneously
• Support for Asterisk^® and FreeSWITCH^®
• Fully compatible with all commercially available motherboards—proper PCI-standard interrupt sharing without manual tuning
• Dimensions: Full height by half length (107mm x 176mm)
• Connector: Dense 68 pin SCSI type interface
• Intelligent hardware: Downloadable FPGA programming with multiple operating modes; add new features related to voice and/or data when they become available
• Line decoding: HDB3, AMI, B8ZS
• Framing: CRC-4, Non CRC4, ESF, SF, D4, J1 (Japan)
• PCI Express Bus Version: 1.1

• Power consumption: 2A @ 3.3V, 0.1A @ 12V

• Temperature range: 0 – 50 °C
• Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems
• Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI
• T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications
• Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU
• Uses raw bitstream interfaces to support arbitrary non-standard line protocols, such as non-byte aligned monosynch or bisynch
• WANPIPE^® routing stack is completely independent of TDM voice application for total system reliability
• WANPIPE^® supports certified, field-tested, and reliable Frame Relay, PPP, HDLC, and X.25
• Impedance: Configurable to 75ohms or 120ohms

Optional DSP Hardware Echo Canceller Daughtercard

• G.168–2002 echo cancellation in hardware
• 1024 taps/128 ms tail per channel on all channel densities
• DTMF decoding and tone recognition
• Voice quality enhancement: music protection, acoustic echo control, and adaptive noise reduction
• Does not increase the physical size of the card, and no additional slot is required

Operating Systems

• Windows^® 2003, Windows^® XP, Windows^® Server 2008, Windows^® Vista, Windows^® 7
• Linux (all versions, releases and distributions from 1.0 up)

T1/E1 Status Alarms

• RED: Telco Red Alarm Condition
• OOF: Out of Frame
• LOS: Receive Loss of Signal
• AIS: Alarm Indication Signal
• RAI: Remote Alarm Indication (Yellow Alarm)

Line Protocols

Voice CAS, MFC/R2, PRI, ATM, Frame Relay, X.25, HDLC, PPP, SS7, Transparent bit-stream, BSC

Higher Level Protocols

IP/IPX over Frame Relay/PPP/HDLC/X.25, X.25 over Frame Relay (Annex G), BSC over X.25, SNA over X.25, PPPoE,PPPoA, IP over ATM

Certification (Pending)

• FCC Part 15 Class A, FCC Part 68, CISPR 22, EN 55022, Class A, CIPSR 24, AFIC-2016, IEC 60950, JATE

Diagnostic Tools

WANPIPEMON, System Logs

Warranty

Lifetime warranty on parts and labour. Plus a 30-day no questions asked return policy.

Production Quality

ISO 9002