Manufacturers

Sangoma A116EKIT

Sangoma A116EKIT - 16-Span T1/E1/J1 Board (No H/W Echo Cancellation) Kit with Cable (CBL-649)

More details


$3,348.00 tax excl.


Sangoma A116

 

The highest density digital interface card in the market

 

Sixteen spans of T1, E1 or J1 available with carrier-grade hardware echo cancellation.

  • 16 T1/E1 spans with PCI Express interface
  • Double the density of any card on the market today
  • Supports up to 480 simultaneous voice calls
  • Supports up to 32.8 Mbps of full duplex data
  • Asterisk® and FreeSWITCH® ready
  • Easier implementation in Asterisk based PBX systems
  • Support for large Value-Added Services
  • Expand large IVR Systems and Call Centers
  • Easier long term maintenance

Technical Specifications

 

  • Sixteen T1/E1 ports with optimum PCI–Express interface for high performance voice and data applications
  • Mix T1 channel banks and E1 networks with full channel synchronization. TDM clocking mode lets network timing to be passed from a network-connected DS0 to any or all of the other ports so both T1 and E1 are supported simultaneously
  • Support for Asterisk® and FreeSWITCH®
  • Fully compatible with all commercially available motherboards—proper PCI-standard interrupt sharing without manual tuning
  • Dimensions: Full height by half length (107mm x 176mm)
  • Connector: Dense 68 pin SCSI type interface
  • Intelligent hardware: Downloadable FPGA programming with multiple operating modes; add new features related to voice and/or data when they become available
  • Line decoding: HDB3, AMI, B8ZS
  • Framing: CRC-4, Non CRC4, ESF, SF, D4, J1 (Japan)
  • PCI Express Bus Version: 1.1
  • Power consumption: 2A @ 3.3V, 0.1A @ 12V

  • Temperature range: 0 – 50 °C
  • Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems
  • Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI
  • T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications
  • Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU
  • Uses raw bitstream interfaces to support arbitrary non-standard line protocols, such as non-byte aligned monosynch or bisynch
  • WANPIPE® routing stack is completely independent of TDM voice application for total system reliability
  • WANPIPE® supports certified, field-tested, and reliable Frame Relay, PPP, HDLC, and X.25
  • Impedance: Configurable to 75ohms or 120ohms

Optional DSP Hardware Echo Canceller Daughtercard

  • G.168–2002 echo cancellation in hardware
  • 1024 taps/128 ms tail per channel on all channel densities
  • DTMF decoding and tone recognition
  • Voice quality enhancement: music protection, acoustic echo control, and adaptive noise reduction
  • Does not increase the physical size of the card, and no additional slot is required

Operating Systems

  • Windows® 2003, Windows® XP, Windows® Server 2008, Windows® Vista, Windows® 7
  • Linux (all versions, releases and distributions from 1.0 up)

T1/E1 Status Alarms

  • RED: Telco Red Alarm Condition
  • OOF: Out of Frame
  • LOS: Receive Loss of Signal
  • AIS: Alarm Indication Signal
  • RAI: Remote Alarm Indication (Yellow Alarm)

Line Protocols

Voice CAS, MFC/R2, PRI, ATM, Frame Relay, X.25, HDLC, PPP, SS7, Transparent bit-stream, BSC

Higher Level Protocols

IP/IPX over Frame Relay/PPP/HDLC/X.25, X.25 over Frame Relay (Annex G), BSC over X.25, SNA over X.25, PPPoE,PPPoA, IP over ATM

Certification (Pending)

  • FCC Part 15 Class A, FCC Part 68, CISPR 22, EN 55022, Class A, CIPSR 24, AFIC-2016, IEC 60950, JATE

Diagnostic Tools

WANPIPEMON, System Logs

Warranty

Lifetime warranty on parts and labour. Plus a 30-day no questions asked return policy.

Production Quality

ISO 9002

Search

Cart  

(empty)

New products

No new product at this time